Skip to content Skip to footer

Roll-In Docks

Our Paradise Roll-In dock is the perfect solution for applications that require seasonal removal. Its robust heavy-duty design can handle rough conditions yet is still light enough for easy removal. We have many unique design features and construction methods that set us apart from the competition.

Screw Jack Legs

The screw-jack legs utilize an aluminum acme rod and composite nut. They are maintenance free and allow the dock height to easily be adjusted with a cordless drill from the top of the dock.

Double Braced Legs

The docks double braced legs provide superior stability and durability.


Our track system utilizes stainless steel T-Bolts and aluminum T-Nuts to allow installation of accessories anywhere along the dock.

Dock Connector

Dock sections clip together with our extruded dock connector. There are two positions, locked and transport. When installing or removing, the sections should be in the transport mode to allow the sections to pivot so they will not bind against each other.

Quick Hinge Pin

The ramp connects with our extruded quick hinge bracket and a stainless steel ball pin. At the end of the year simply pull the ball pin and the ramp easily detaches.

Mud Tires

Our 18″ self-draining roto-moulded dock tire provides excellent stability to your dock system. Its wide robust design makes installation a breeze. Alternative sand-pad footing available.


EMAIL: [email protected]
TOLL FREE: 1-888-411-3625

3D Viewer

Check out all of the options in the 3D Viewer below.

Para Track

Our industry leading Para-Track runs the full perimeter of the dock. It utilizes custom machined stainless steel T-bolts and aluminum T-nuts to allow easy installation of accessories anywhere along the dock. All the accessories can be installed from the top of the dock allowing you to stay dry, simply insert the T-bolt or T-nut into the track, rotate and tighten. It’s that easy!

Quality Components

Our dock system is constructed to the highest standard with premium materials.

Decking Options

We offer multiple decking choices so you can achieve the look that you desire. Our non-skid decking is recessed into the dock, the boards are screwed down and can easily be replaced if needed. Aluminum trim piece provides a neat and clean finished edge to the dock. We offer powder coated grey decking, our premium powder coated woodgrain, and SureStep perforated decking.

Our decking allows water and air to pass through resulting in a safer, cooler surface!

Grey Aluminum

Our standard grey powder coated aluminum decking will give your dock a timeless look. The paint exceeds the AAMA 2604 designation for corrosion resistance and colour fastness.

Wood Grain

Our beautiful woodgrain decking is a maintenance free aluminum product that has been powder coated with a two-step process. Our finish is durable and rugged giving you the look of real wood without the maintenance associated with it.

Perforated Decking

SureStep perforated decking is perfectly suited for those concerned about high wave action. It allows the waves to blow through while also providing a slip resistant surface

Wood Grain Decking

Our beautiful woodgrain decking gives you the natural look of real wood without the maintenance associated with it. The powder-coating process is tough and durable providing an attractive alternative to the standard grey finish. The woodgrain decking is available on all sectional and roll-in dock systems.

Wheel Kits

Our industry leading double-braced wheel kits allow for installation in water up to 9.5′ deep. The kits feature a screw-jack system that can easily be adjusted from the top of the dock with a cordless drill. For seasonal removal we recommend using the mud tire and for more permanent applications a sand-pad can be used.

For standard installations we recommend setting the top of the dock 18″ above the water. For lakes that are prone to high wave action or heavy boat traffic we suggest setting the top of the dock 24″ above the water.

Dock Sizes

Our roll-in dock sections come in a variety of standard sizes allowing you to easily design the dock of your dreams. The modular system allows you to easily reconfigure and expand your system as your needs change. Sections simply clip together with our extruded dock connector.





Roll-In Dock Sections:
4′ x 16′, 4′ x 12′, 6′ x 12′, 4′ x 8′, 4′ Wedge

Sundeck Sizes:
8′ x 16′, 8′ x 12′, 8′ x 8′

Ramp Sizes:
4′ x 12′, 4′ x 10′, 4′ x 8′

Dock Accessories

We offer a full-line of dock accessories to complement your system, all our accessories utilize our Para-Track for quick installation. To learn more how to enhance the look of your dock and make a day at the lake easier, click below for more information.


For more information on the hydraulic boat lifts please download the brochure or contact us for more information.