Skip to content Skip to footer

Sectional Docks

Sectional docks are the perfect cost effective system for your waterfront property. The docks feature a sturdy durable design that is stack-able for easy storage. They can be installed with either the roll-in screw-jack legs or the set-screw stationary leg. The sectional dock also features an extruded accessory track allowing infinite adjustment of your dock accessories.

Screw Jack Legs

The screw-jack legs utilize an aluminum acme rod and composite nut. They are maintenance free and allow the dock height to easily be adjusted with a cordless drill from the top of the dock.


Our track system utilizes stainless steel T-Bolts and aluminum T-Nuts to allow installation of accessories anywhere along the dock.

Dock Connector

Dock sections clip together with our extruded dock connector. There are two positions, locked and transport. When installing or removing, the sections should be in the transport mode to allow the sections to pivot so they will not bind against each other.

Quick Hinge Pin

The ramp connects with our extruded quick hinge bracket and a stainless steel ball pin. At the end of the year simply pull the ball pin and the ramp easily detaches.

Mud Tires

Our 18″ self-draining roto-moulded dock tire provides excellent stability to your dock system. Its wide robust design makes installation a breeze. Alternative sand-pad footing available.


EMAIL: [email protected]
TOLL FREE: 1-888-411-3625

Para Track

Our industry leading Para-Track runs the full perimeter of the dock. It utilizes custom machined stainless steel T-bolts and aluminum T-nuts to allow easy installation of accessories anywhere along the dock. All the accessories can be installed from the top of the dock allowing you to stay dry, simply insert the T-bolt or T-nut into the track, rotate and tighten. It’s that easy!

Quality Components

Our dock system is constructed to the highest standard with premium materials.

Decking Options

We offer multiple decking choices so you can achieve the look that you desire. Our non-skid decking is recessed into the dock, the boards are screwed down and can easily be replaced if needed. Aluminum trim piece provides a neat and clean finished edge to the dock. We offer powder coated grey decking, our premium powder coated woodgrain, and SureStep perforated decking.

Our decking allows water and air to pass through resulting in a safer, cooler surface!

Grey Aluminum

Our standard grey powder coated aluminum decking will give your dock a timeless look. The paint exceeds the AAMA 2604 designation for corrosion resistance and colour fastness.

Wood Grain

Our beautiful woodgrain decking is a maintenance free aluminum product that has been powder coated with a two-step process. Our finish is durable and rugged giving you the look of real wood without the maintenance associated with it.

Perforated Decking

SureStep perforated decking is perfectly suited for those concerned about high wave action. It allows the waves to blow through while also providing a slip resistant surface

Wood Grain Decking

Our beautiful woodgrain decking gives you the natural look of real wood without the maintenance associated with it. The powder-coating process is tough and durable providing an attractive alternative to the standard grey finish. The woodgrain decking is available on all sectional and roll-in dock systems.

Leg Options

Our sectional docks can utilize the screw-jack legs and tires that are found on our flagship roll-in dock. The screw-jack legs are a great option when the dock has to be moved several times throughout the boating season. For customers that don’t need to make frequent adjustments, the set-screw leg with sand-pad is a great choice.


Our sectional docks utilize the same double-braced screw-jack legs found on our Roll-In dock, this allows for installation in water up to 7.5′ deep. The kits feature a screw-jack system that can easily be adjusted from the top of the dock with a cordless drill. For seasonal removal we recommend using the mud tire and for more permanent applications a sand-pad can be used.

For standard installations we recommend setting the top of the dock 18″ above the water. For lakes that are prone to high wave action or heavy boat traffic we suggest setting the dock 24″ above the water.

Dock Sizes

Our sectional docks come in three standard sizes: 4’x8′, 4’x10′, and 4’x12′. It is a modular system that connects easily with our dock connector allowing you to move and expand your system as your needs change.


Dock Accessories

We offer a full-line of dock accessories to complement your system, all our accessories utilize our Para-Track for quick installation. To learn more how to enhance the look of your dock and make a day at the lake easier, click below for more information.


For more information on the hydraulic boat lifts please download the brochure or contact us for more information.